Roller CAM transmission principle Excellent cost performance Mechanical pattern table Mechanical exterior drawing Brake control instructions Longitude check item Table selection of turntable specifications |
No gap/back
Roller and CAM rolling drive, no forward and reverse backlash problem, improve the roller and CAM super precision special, reduce the difficulty of assembly, improve quality.
High efficiency transmission
Roller and CAM rolling drive, reduce wear, high transmission efficiency, high speed operation transmission efficiency up to 90%.
No thermal displacement /
High speed operation, reduce wear. Reduce thermal displacement.
Maintenance /.
Due to low abrasion and minimal aging, the initial accuracy can be maintained for a long time.
Superior brake /
When the brake is positioned, the disk surface will not float or tilt, and the positioning brake is kept within 0.002mm, which is a breakthrough in finishing technology.
Solid structure /
Using the latest YRT bearing support, high rigidity, heavy load.
No maintenance adjustment and high cost performance
Worm gear and worm /
Accuracy decreases with time and requires regular maintenance to reach or approach the initial accuracy.
No backlash roller /
Consistent accuracy within 5 million operating cycles without maintenance.
Worm gear and worm /
Once or twice a year maintenance is required to adjust the accuracy of the rebound.
No backlash roller /
Long-term use without any maintenance.
Maintain absolute repeat positioning accuracy
Test conditions /
Table size: φ170
Inertial capacity: 0.5 KGM ²
Single degree Angle: 36°
Single dividing time: 0.3 SEC
Different processing modes improve efficiency
Worm gear and worm /
90 degree positioning requires tightening of the brake mechanism to suppress backlash.
No backlash roller /
Zero clearance and high rigidity do not need clamping, light load processing without brake, positioning time reduced to about 1/3.
機械式樣表
NO. 項目PROJECT 170~500單位：m
|
|
